• PA amplifier with 1500 watts maximum power (2 x 750W at 4 Ohms, 2 x 450W at 8 ohms, 1500W Bridge-power at 8 ohms)

• Suitable on 48cm (19") rack installation - 2 rack units

• Bridgeable - 2/1- channel operation

The Malone DX1500 is a powerful PA amplifier that gives your audio signal the power required whenworking with a large audience. The amp is fed with sound through two RCA inputjacks and two 6.3 mm audio inputs. The connection to the speakers is made byfeeding the audio signal either through the two NL4 outputs, the two 6.3 mmjacks or the screw terminals, making the DX1500 a versatile amp for a varietyof locations and connection situations.

Every audio channel is equipped with the ordinary 750 watts.The output power of each channel can be easily configured using the two handyfront panel knobs. The amplifier can be operated in so-called bridge mode withonly one channel as an alternative to the two-channel stereo mode. Changing betweenthe two variants is easily done with a switch back and forth. The performanceof this one channel is doubled accordingly and pushes the audio signal to thespeakers with a powerful 1500 watts. Sonically, we should not be afraid to pushthe performance of the amplifier because even at the highest levels, the DX1500 produces a very clean sound.

For the case of internal ground loops and hum the circuit ofthe device can be very easily separated from the crowd with the Ground LiftSwitch. The casing of the DX1500 offers a clean design that accuratelyrepresents the force of the booster. It is made entirely of metal and is easilyloadable on a 48cm (19") rack installation.

• Inputs: 2 x 6.3mm jack, 2 x RCA
• Outputs: 2 x NL4, 2 x 6.3mm jack, 2 x screw terminal
• Two large, ergonomic knobs for easy adjustment to thedesired level
• Ground/lift switch
• Resilient metal housing
• Channel by channel adjustable volume
• LED indication for clipping and backup
• Frequency range: 10Hz to 20kHz
• Damping factor:> 250
• S/N Ratio:> 90dB
• Slew Rate: 30V/uSec
• Input sensitivity: 0.77 V
• Input impedance: 20k ohms
• Total harmonic distortion: <0.1%
• Supply voltage:
• Power button
• Power supply: 220V/50Hz

• 48.2 x 8.8 x 31.4 cm (WxHxD)
• Weight: about 9 kg

• Passive 30cm (12") PA speaker system with piezotweeter and 200 watts RMS power

• Robust bass reflex cabinet with felt cover, impact edges andmetal speaker grille

• Side handles, rubber feet and stand mount for quick-standmounting

Input options are available via the 6.3 mm jack input whichconnects speakers with audio setups of any kind

The sturdy felt-covered wood body, carry handles and metalbumper edges make the device an ideal tour companion. On the overhead top-hatBulkhead 2 floor structures can be implemented quickly and easily.

The peak power of the TX12 Skytec PA speaker is 750w Peak.

• Connections: 1 x 6.3mm jack input, 1 x set of speaker terminals
• Peak power: 750W
• Power: 350W
• Impedance: 8 ohms
• Frequency response: 30Hz - 20kHz
• SPL: max. 124dB

• 40 x 60 x 30cm (WxHxD)
• Weight: about 10.5 kg