• PA amplifier with 800 watts maximum power (2 x 400W at 4Ohms, 2 x 240W at 8 ohms, 800W Bridge-power at 8 ohms)

• Suitable on 48cm (19") rack installation - 2 rack units

• Bridgeable - 2/1- channel operation

The Malone DX800is a powerful PA amplifier that gives your audio signal the power required whenworking with a large audience. The amp is fed with sound through two RCA inputjacks and two 6.3 mm audio inputs. The connection to the speakers is made byfeeding the audio signal either through the two NL4 outputs, the two 6.3 mmjacks or the screw terminals, making the DX800 a versatile amp for a variety oflocations and connection situations.

Every audio channel is equipped with the ordinary 400 watts.The output power of each channel can be easily configured using the two handyfront panel knobs. The amplifier can be operated in so-called bridge mode withonly one channel as an alternative to the two-channel stereo mode. Changing betweenthe two variants is easily done with a switch back and forth. The performanceof this one channel is doubled accordingly and pushes the audio signal to thespeakers with a powerful 800 watts. Sonically, we should not be afraid to pushthe performance of the amplifier because even at the highest levels, the DX800 producesa very clean sound.

For the case of internal ground loops and hum the circuit ofthe device can be very easily separated from the crowd with the Ground LiftSwitch. The casing of the DX800 offers a clean design that accuratelyrepresents the force of the booster. It is made entirely of metal and is easilyloadable on a 48cm (19") rack installation.

• Inputs: 2 x 6.3mm jack, 2 x RCA
• Outputs: 2 x NL4, 2 x 6.3mm jack, 2 x screw terminal
• Two large, ergonomic knobs for easy adjustment to thedesired level
• Ground/lift switch
• Resilient metal housing
• Channel by channel adjustable volume
• LED indication for clipping and backup
• Frequency range: 10Hz to 20kHz
• Damping factor:> 250
• S/N Ratio:> 90dB
• Slew Rate: 30V/uSec
• Input sensitivity: 0.77 V
• Input impedance: 20k ohms
• Total harmonic distortion: <0.1%
• Supply voltage:
• Power button
• Power supply: 220V/50Hz

• 48.2 x 8.8 x 31.4 cm (WxHxD)
• Weight: about 9 kg

• 2-way speaker with powerful 8" mid/low driverand dynamic horn driver

• 100W RMS output

• Shock-proof, wear-resistant ABS housing – suitable for inand outdoor use

The Skytec SPJ800 2-way compact speaker offers a powerful soundand high sound pressure. The tough ABS housing makes the speaker ideal forportable and outdoor use.

The Skytec SPJ800 displays its qualities best inmedium-sized venues. Thank to its simple black colour and stylish design, thespeaker is perfect for lounges, bars and restaurants. A real plus point for allkinds of events is its standard flange connection that allows the Skytec SPJ800to be easily connected to a speaker stand.

With its PA in/outputs, the speaker can be integrated intoany modern sound setup. Thanks to its side carrying handles, floor rollers andcompact dimensions, the Skytec SPJ800 speaker is extremely easy to transport.

• Connections: 1 x PA line inputs, 1 x PA line output
• Sensitivity: 115dB
• Frequency response: 65Hz – 18kHz
• Impedance: 8 Ohm
• Protective metal grille
• Side carrying handles

• 25 x 39 x 22cm (W x H x D)
• Weight: 4.2kg