• PA amplifier with 1200 watts maximum power (2 x 600W at 4Ohms, 2 x 4000W at 8 ohms, 1200W Bridge-power at 8 ohms)

• Suitable on 48cm (19") rack installation - 2 rack units

• Bridgeable - 2/1- channel operation

The Malone DX1200is a powerful PA amplifier that gives your audio signal the power required whenworking with a large audience. The amp is fed with sound through two RCA inputjacks and two 6.3 mm audio inputs. The connection to the speakers is made byfeeding the audio signal either through the two NL4 outputs, the two 6.3 mmjacks or the screw terminals, making the DX1200 a versatile amp for a varietyof locations and connection situations.

Every audio channel is equipped with the ordinary 600 watts.The output power of each channel can be easily configured using the two handyfront panel knobs. The amplifier can be operated in so-called bridge mode withonly one channel as an alternative to the two-channel stereo mode. Changing betweenthe two variants is easily done with a switch back and forth. The performanceof this one channel is doubled accordingly and pushes the audio signal to thespeakers with a powerful 1200 watts. Sonically, we should not be afraid to pushthe performance of the amplifier because even at the highest levels, the DX1200produces a very clean sound.

For the case of internal ground loops and hum the circuit ofthe device can be very easily separated from the crowd with the Ground LiftSwitch. The casing of the DX1200 offers a clean design that accuratelyrepresents the force of the booster. It is made entirely of metal and is easilyloadable on a 48cm (19") rack installation.

• Inputs: 2 x 6.3mm jack, 2 x RCA
• Outputs: 2 x NL4, 2 x 6.3mm jack, 2 x screw terminal
• Two large, ergonomic knobs for easy adjustment to thedesired level
• Ground/lift switch
• Resilient metal housing
• Channel by channel adjustable volume
• LED indication for clipping and backup
• Frequency range: 10Hz to 20kHz
• Damping factor:> 250
• S/N Ratio:> 90dB
• Slew Rate: 30V/uSec
• Input sensitivity: 0.77 V
• Input impedance: 20k ohms
• Total harmonic distortion: <0.1%
• Supply voltage:
• Power button
• Power supply: 220V/50Hz

• 48.2 x 8.8 x 31.4 cm (WxHxD)
• Weight: about 9 kg

• 2-way speaker system with powerful 12" (30cm) mid-low bass driver

• 200W RMS power

• Impact resistant, durable ABS housing - suitable for both indoor and outdoor use

The Skytec SPJ1200 is a passive 2-way compact speaker that provides an impressive sound and a high SPL. The durable ABS housing makes the speaker ideal for mobile use, even outdoors.

The quality of the speaker is ideal for medium-sized locations. Due to the simple black colour and solid design, the speaker is able to be used unobtrusively in areas such as bars or restaurants. A real bonus of the Skytec SPJ1200 is the standard flange found underneath, which can easily be attached to stands.

With PA inputs and outputs, the speaker can be integrated simply into common sound set ups. Thanks to the side handles, the comparatively low weight and manageable dimensions, the Skytec SPJ1200 is easily transportable.

• Connections: 1 x PA-line input, 1 x PA-line output
• Sensitivity: 122dB
• Frequency range: 50Hz - 18kHz
• Impedance: 8 ohms
• Sturdy metal grille
• Side handles

• 11.8 x 22.8 x 13.8 inches (W x H x D) (30 x 58 x 35cm)
• Weight: approx. 24.2 pounds (11kg)

• For connections between PA Amplifiers and Speakers

• Kink Protected

PA Male to Male Connection Kink Protected

• For connections between PA Amplifiers and Speakers

• 5 meters

Shipping time: 3 - 5 days