• USB condenser microphone

• Built-in 16mm electret microphone capsule

• Distinctive cardioid polar pattern

The auna Pro MIC-900S is a studio condenser microphone with a cardioid pattern. It uses a USB cable to connect to a PC or laptop, and is immediately ready to go with Plug & Play.

The auna Pro MIC-900S is specifically designed for singing and speech. With a sample rate of 16 bit/48kHz and a balanced cardioid pattern, vocal recordings are created in the highest sound quality. This ensures the ideal starting material for audio mastering in song production, podcasts or radio streaming.

The included shock mount reduces acoustic vibrations to prevent unwanted noise. Thanks to the ⅝" thread, the mount can easily be used with a commercially available microphone stand. A ⅜" to ⅝" adapter allows it to be used with other thread sizes.

The sturdy metal body is presented in a stylish matte black. The 16mm electret microphone capsule and steel basket guarantee durability and ruggedness, making the auna Pro MIC-900S suitable for on-the-road use, as well as in the studio.

• Connections: USB Type B connection
• Frequency response: 10Hz-20kHz
• Sample rate: 16 bit / 48 kHz
• Sensitivity: -32dB
• SPL: 136dB
• Green power LED
• Power supply: via USB

• Microphone: 6.5 x 2 inches (16.5 x Ø 5cm) (length x Ø)
• Shock mount: 3.5 x 3.5 x 3.9 inches (W x H x D) (9 x 9 x 10cm)
• Cable length: approx. 3 metres
• Microphone weight: approx. 0.6 pounds (295g)
• Shock mount weight: approx. 0.4 pounds (200g)

Shipping time: 3 - 5 days

• Black microphone pop shield with 16cm diameter

• Optimal positioning thanks to the 35cm flexible gooseneck

• Wide-meshed nylon cover with 2 layers

The auna Pro POP-1 pop shield reliably protects your hardware and sound recording against unwanted popping sounds which often arise through the articulation of B and P sounds. The use of anti-pop sheilds pays off just in the studio applications. The loss of height in the audio signal is relatively low thanks to the relatively meshed nylon material and has no relevant impact on the quality of the recording as a whole. The microphone pop shield can be directly mounted on the mic stand with a screw and be optimally positioned via the flexible gooseneck.

• Easy attachment to the stand
• High quality acoustic filter
• Ideal protection for hardware and audio signal
• Material: plastic, nylon, metal
• Colour: Black

• Diameter: 16cm
• Length of gooseneck: 35cm
• Weight: about 205g

Shipping time: 3 - 5 days

• Microphone stand with attachment plus bracket for microphone

• Perfect holding properties (supports up to 1.5 KG)

• Attractively simple design: black arms with silver-coloured screws and clamp

Maybe you just had a melody in your head and want to quickly record it. How easy would it be to get started, right on the window as you’re looking out over the night sky? The foldable, easy-to-use auna Pro ST-1.2 mic stand helps you quickly and easily implement your vision, wherever you want. Everywhere you go: sing your song! Living your dreams can be so easy.

Or do you want to record a podcast? Perhaps together with your friends? In your home or in a studio? Again, the auna Pro ST-1.2 microphone stand proves to be the ideal helper: quickly folded, it fits into any pocket and can be set up in just a few steps in different locations. All it needs is a table edge or shelf. When connected to the auna Pro mic stand, your microphone is in the best hands. “Quiet: recording in progress”, and then you and your friends have everything in place to record a new podcast.

It’s never been so easy to be part of the modern showbiz world! Work like a professional with the auna Pro ST-1.2 microphone stand!

• Optimal for vocal recordings, podcasts, gaming
• Stable positioning by tension springs
• Light weight for a comfortable transport
• Also suitable for mounting lights
• Clamp fastener for mounting on tabletops or shelves

• Dimensions: about 35 x 35 cm (vertical x horizontal)
• Weight: about 500 g

Shipping time: 3 - 5 days