• Black high-performance condenser microphone with cardioid pattern

• 32mm gold-sputtered membrane

• Switchable low-pass filter and adjustable sensitivity

The Auna CM003 is a high-performance condenser microphone with cardioid polar pattern, excellent performance and quality components.

The special features include a wide frequency response, wide dynamic range and low noise floor.This results in a first-class audio signal which also positively affects the recording quality. An important reason for this is the 32mm gold-sputtered membrane that produces an audibly warm, full-bodied, low-noise sound. This sound can be adapted with a switchable low-cut filter and pad.

Among other things the delivery includes a spider stand in an elastic nylon mesh to avoid unwanted vibrations and oscillations. In addition, the device comes with a windscreen to reduce atmospheric noise such as wind and sibilance. Of course, the set also includes a 5/8" to 3/8" screw adapter for tripod mounting.

This microphone is ideal for use in a studio, at concerts as well as for broadcasting and live applications.

**Please note that all of our condenser microphones require +48v Phantom Power, which can be supplied from external audio cards, mixing consoles etc. Please check that your equipment is compatible with this item before proceeding with your purchase.*Please note that the microphone is not equipped with a USB port. For direct connection with the computer, we recommend the following item numbers: 10006514, 10006515, 10011703 und 10011711.

• Connections: 1 x XLR output
• Frequency range: 20Hz - 20kHz
• Sensitivity: 38.5 dB
• Impedance: 250 ohms
• Noise Level: 20dB (A-weighted)
• SPL: max. 125dB for 0.5% THD
• Low Cut switch
• Pad switch
• Power supply: 48V phantom power Not Included)

• Height: 19cm
• Diameter: 4.5 cm
• Weight: about 444g

• Converter to connect XLR microphones into the USB port of your PC or Mac

• No complicated installation thanks to Plug & Play

• Adjustable volume, gain and monitoring

Make your home PC or Mac recording studio-compatible with the Auna AI-01 XLR-USB converter. Whether you want to record for your own podcast, record music or singing or record sound for your videos, the quality of the microphone is what matters the most. With the AI-01 you do not need expensive special equipment: simply connect any studio-grade XLR microphone directly into the USB port of your computer. No complicated installation is necessary. Thanks to the Plug & Play technology, the converter is detected completely automatically and you can start recording immediately.

Functionally, the XLR-USB connecter supports the processing of your audio signal with its best effort. You can directly regulate volume and gain to avoid signal overdrive while recording. An LED light in green, yellow and red provides information on peaks and clipping and lights up the adjustment of the connected microphone. Using headphones, sound recordings can be listened to and controlled directly and latency-free via live monitoring. For connecting the headphones, the converter features a 3.5mm jack output. It is also possible to listen to pre-recorded tracks via monitoring to mix with the actual live recording. Activate 48V phantom power with the press of a button, so that condenser mics can easily find a connection. The best conditions for perfect audio recordings.

The handy AI-01 XLR-USB converter from Auna fits easily in your pocket and can be attached with Velcro strips to the microphone stand. The 3m-long USB cable ensures high freedom of movement.

• Connections: 1 x XLR mic input, 1 x mini-USB output, 1 x 3.5mm jack output
• Resolution: 16 bit
• 48V phantom power
• 44.1kHz / 48kHz sampling rate
• Latency-free live mix during recording through headphones connector
• Control LEDs for clipping / peak, proper connection and phantom power
• Velcro for mounting to microphone stands etc.

• Dimensions: 15.3 x 3.3cm (LxØ)
• Length USB cable: 3m
• Weight: about 250g

• Microphone stand with attachment plus bracket for microphone

• Perfect holding properties (supports up to 1.5 KG)

• Attractively simple design: black arms with silver-coloured screws and clamp

Maybe you just had a melody in your head and want to quickly record it. How easy would it be to get started, right on the window as you’re looking out over the night sky? The foldable, easy-to-use auna Pro ST-1.2 mic stand helps you quickly and easily implement your vision, wherever you want. Everywhere you go: sing your song! Living your dreams can be so easy.

Or do you want to record a podcast? Perhaps together with your friends? In your home or in a studio? Again, the auna Pro ST-1.2 microphone stand proves to be the ideal helper: quickly folded, it fits into any pocket and can be set up in just a few steps in different locations. All it needs is a table edge or shelf. When connected to the auna Pro mic stand, your microphone is in the best hands. “Quiet: recording in progress”, and then you and your friends have everything in place to record a new podcast.

It’s never been so easy to be part of the modern showbiz world! Work like a professional with the auna Pro ST-1.2 microphone stand!

• Optimal for vocal recordings, podcasts, gaming
• Stable positioning by tension springs
• Light weight for a comfortable transport
• Also suitable for mounting lights
• Clamp fastener for mounting on tabletops or shelves

• Dimensions: about 35 x 35 cm (vertical x horizontal)
• Weight: about 500 g

Shipping time: 3 - 5 days

• Black microphone pop shield with 16cm diameter

• Optimal positioning thanks to the 35cm flexible gooseneck

• Wide-meshed nylon cover with 2 layers

The auna Pro POP-1 pop shield reliably protects your hardware and sound recording against unwanted popping sounds which often arise through the articulation of B and P sounds. The use of anti-pop sheilds pays off just in the studio applications. The loss of height in the audio signal is relatively low thanks to the relatively meshed nylon material and has no relevant impact on the quality of the recording as a whole. The microphone pop shield can be directly mounted on the mic stand with a screw and be optimally positioned via the flexible gooseneck.

• Easy attachment to the stand
• High quality acoustic filter
• Ideal protection for hardware and audio signal
• Material: plastic, nylon, metal
• Colour: Black

• Diameter: 16cm
• Length of gooseneck: 35cm
• Weight: about 205g

Shipping time: 3 - 5 days