• Huge range of connection options including effects send-receive section for connecting external effects

• 10-band EQ for main output channels for fine tuning of the mix and endless creative opportunities

• 3 main channel kill switches with adjustable cut levels

The IBIZA DJM-102 is the ultimate DJ mixer for those who need full control over their set and refuse to compromise on sound quality.

Multiple connection options and 10 inputs gives you the flexibility to run CD, vinyl and virtual decks in tandem allowing access to a huge range of music sources to DJ with.

A top mounted microphone input with 3-band EQ allows for voiceovers and a further microphone input round the back is perfect for either an MC or even for Karaoke.

Finally an echo section for the microphone, headphone section and 12 volt lamp output round out the features of this pro spec mixer. The best thing about the whole deal, you won’t believe the price!

All these features and pro sound quality make this a deal you just won’t want to miss!

• Connections: 6.3 mm jack headphone output, 2 x 6.3 mm jack, microphone input (one front mounted, one rear mounted), 6 x RCA line inputs, 2 x switchable Line/Phono inputs, 1 x FX Send-Receive-section for connection of external effects, 1 x RCA output (for recording), 1 x RCA Booth output, 1 x RCA master output, 1 x 6.3 mm jack master output
• Echo section with variable Delay, Repeat, Level controls and on / off switch
• Microphone section with 2 inputs, talk-over function (-16dB attenuation), separately adjustable volume for both Microphones and smooth arrangements for bass, mids and highs (globally for both connections)
• Effects section with 8 push-button activated effects (lasers, machine gun, blast, rimshot, siren, alarm, UFO Soundscape and cymbal) - adjustable-volume effect and effect-playback speed
• Cross fader channel assignment rotary switch
• Cue function (Pre fade listen) channel fader switchable
• Cue function channel buttons
• LED backlit master channel faders with adjustable gain
• 12 volt BNC connector for lamp
• Master level meters
• Equalizer On / Off Switch
• Effect On / Off Switch
• Balance control on master channel
• Mono and stereo mode toggle switch (Master channel)
• Mono and stereo mode toggle switch (Booth-channel)
• Frequency response: 20 Hz to 20 kHz
• Echo Delay Range : 50 to 120ms
• Power supply: 115/230V - 50/60 Hz - switchable

• 49 x 10.5 x 24cm
• Weight: approx 3.5 kilograms

• USB and SD inputs for direct playback of MP3 from the appropriate USB and SD storage media

• Multifunctional, handy jog wheel with Scratch Function

• Reverse and brake function

The Ibiza IDJ2 is a DJ tool that’s prefect for those with large music libraries in MP3 format. Unlike many other controllers in its price class IDJ2 grants you the freedom to decide whether you access your MP3 collection via USB or SD storage media. The tracks here can be manipulated in many ways and as with a conventional double CD player all the usual functions are available with loop function, pitch and cue as standard.

Creative functions include reverse and brake functions as well as scratch functionality which can be controlled through the well-balanced Jog wheels. The Ibiza IDJ-2 is also suitable for the 48cm (19") rack installation.

• Connections: 2 x SD input, 2 x USB input, 2 x stereo RCA line output
• Playable formats: MP3
• Compatible USB / SD media: up to 4GB, (SDHC cards not compatible)
• Pitch range: ± 24% with pitch bend
• Cue function - set of return points
• Loop Reloop function / Seamless Loop Function
• Reverse function
• Brake function
• Convenient folder search
• Single and Continuous play modes
• Various modes of time: remaining time, elapsed playing time, total remaining time
• Power supply: 100-240V ~ 50-60Hz

• 48.2 x 9 x 8.4 cm
• Weight: approx. 2.1 kg
• Suitable for 48cm (19 ") rack installation

• Suitable for almost all 19" (48cm) devices up to 12U

• Adjustable top section (up to +45˚ or -135˚ tilting) foreasily accessible controls

• Extremely gig-friendly and portable thanks to four wheels

With the 19" (48cm) Auna rack stand, you can keep allyour rack gear stored away and permanently cables so that set-up and takedowntime of PA setups and gig-to-gig transport is drastically reduced. All of our19" PA amplifiers, dual CD players and mixers fit perfectly into the 19"(48cm) format. With a total of 21U, you have plenty of room available.

Its four wheels allow not only for easy transport of heavyDJ PA equipment, the rack stand also features a high-quality steel constructionthat protects against damage. Thanks to the stop brake mechanism on two of thewheels, the rack can also be fixed in place and secured against any inadvertentrolling away.

Comfortable, ergonomic control of your equipment is possiblethanks to the adjustable top section. The top section can be adjusted to a tiltof +45˚ or -135˚ and fixed in place with the locking mechanism. The 19"(48cm) Auna rack stand is a portable studio and stage rack with impressivedurability and user friendliness.

The rack stand comes shipped as an assembly kit. Set up isextremely easy and can be completed within 10 minutes.

• 4 rubber wheels
• 360˚ rotatable wheels
• Adjustable top section with screw mechanism
• Secured via locking pin
• Bottom rack section with 9U for amplifiers, CD players etc
• Top rack section with 12U for CD player controllers, effectsunits, mixers etc
• Max. load capacity: 50kg

• Max. installation width: 19" (48cm)
• Tilting top section installation height: 21" (54cm) or12U with 24 fixing points
• Bottom section installation height: 16" (41cm) or 9Uwith 18 fixing points
• Bottom section installation depth: 20" (51.5cm)
• 55.5 x 105 x 57cm
• Weight: 9.5kg

Shipping time: 3 - 5 days

• Modern LED technology for up to 960W MAX power output @ 4 ohms (2 x 320W max. at 8 ohms)

• Low rise time and consistent sonic characteristics

• Multiple connectivity options

A practical, great value 2 channel PA Amplifier with 960 Watts of power! Perfect for DJ’s or small PA set ups, parties and events this amplifier delivers power when you need it!

Sturdy construction and the option of rack mounting mean this amp is perfectly at home on the road or in the studio and the multiple inputs and outputs give it the flexibility to be used in a variety of different set ups. If you’re after a low cost amp that’s big on performance you’ll be crazy to miss a deal as good as this!

For compatible speakers please see the other items in our shop!

• Inputs: 1 x stereo RCA, 1 x 6.3 mm jack (stereo)
• Outputs: 1 x XLR (stereo =, 1 x PA-Speakon (stereo), 1 x screw terminal (stereo)
• ch-ch volume levels (embedded controller)
• LED meter
• High performance cooling fans
• Overload protection circuit Frequency response: 20 Hz to 20 kHz
• Distortion:> 0.5%
• Signal to noise ratio:> 98dB
• Channel Separation:> 98dB
• Input impedance:> 10dB
• Power supply 20V, 50/60Hz

• 48 x 9 x 28cm
• Weight: approx. 5.7 kg
• Suitable for 19 "/ 48cm Rack - 2 rack units

• 3 way speaker with 12” bass driver, mid-range horn, and piezo tweeter

• 300W RMS – 600W max power!

• Easy to transport – durable

Powerful full range PA speaker – big sound at an unbeatable price!

This professional 3 way PA speaker is perfect for DJ’s, musicians and bands or for sound reinforcement at conferences. With 300 Watts RMS power output and sturdy construction to match, the Malone PW-1222 is guaranteed to impress. Compact and durable it’s easily transported and includes built in top hat speaker stand mounting points. A versatile great sounding PA speaker, you won’t find a better deal at a better price.

For compatible stands and amplifiers please see our other items.

Please note this product has had recently a brand logo change. Please be aware the logo may be different than pictured.

• Connections: 1 x speakon input, 1 x speakon output, x 6.3mm jack input, 1 x 6.3mm jack output, 1 x gold-plated dual screw terminal input
• Sensitivity: 96 dB
• Frequency range: 30 Hz to 18 kHz
• Impedance: 8 Ohm

• 36 x 52 x 31 cm
• Weight: approx. 20.2 kg

• Highly flexible cable in required length. Fine assembly with 2 wire cable, one wire coloured.
• 1.5mm² core

• Highly flexible cable in required length. Fine assembly with 2 wire cable, one wire coloured.
• 1.5mm² core

• 1.5mm² core

Shipping time: 3 - 5 days