• Huge range of connection options including effects send-receive section for connecting external effects

• 10-band EQ for main output channels for fine tuning of the mix and endless creative opportunities

• 3 main channel kill switches with adjustable cut levels

The IBIZA DJM-102 is the ultimate DJ mixer for those who need full control over their set and refuse to compromise on sound quality.

Multiple connection options and 10 inputs gives you the flexibility to run CD, vinyl and virtual decks in tandem allowing access to a huge range of music sources to DJ with.

A top mounted microphone input with 3-band EQ allows for voiceovers and a further microphone input round the back is perfect for either an MC or even for Karaoke.

Finally an echo section for the microphone, headphone section and 12 volt lamp output round out the features of this pro spec mixer. The best thing about the whole deal, you won’t believe the price!

All these features and pro sound quality make this a deal you just won’t want to miss!

• Connections: 6.3 mm jack headphone output, 2 x 6.3 mm jack, microphone input (one front mounted, one rear mounted), 6 x RCA line inputs, 2 x switchable Line/Phono inputs, 1 x FX Send-Receive-section for connection of external effects, 1 x RCA output (for recording), 1 x RCA Booth output, 1 x RCA master output, 1 x 6.3 mm jack master output
• Echo section with variable Delay, Repeat, Level controls and on / off switch
• Microphone section with 2 inputs, talk-over function (-16dB attenuation), separately adjustable volume for both Microphones and smooth arrangements for bass, mids and highs (globally for both connections)
• Effects section with 8 push-button activated effects (lasers, machine gun, blast, rimshot, siren, alarm, UFO Soundscape and cymbal) - adjustable-volume effect and effect-playback speed
• Cross fader channel assignment rotary switch
• Cue function (Pre fade listen) channel fader switchable
• Cue function channel buttons
• LED backlit master channel faders with adjustable gain
• 12 volt BNC connector for lamp
• Master level meters
• Equalizer On / Off Switch
• Effect On / Off Switch
• Balance control on master channel
• Mono and stereo mode toggle switch (Master channel)
• Mono and stereo mode toggle switch (Booth-channel)
• Frequency response: 20 Hz to 20 kHz
• Echo Delay Range : 50 to 120ms
• Power supply: 115/230V - 50/60 Hz - switchable

• 49 x 10.5 x 24cm
• Weight: approx 3.5 kilograms

• Modern MOSFET technology

• 480 Watt max achievement at 4 ohms (2 x 160 Watt at 8ohm)

• LED VU meter

A practical 2 channel PA Amplifier with 480 Watt of power! Ideally for PA or DJ set ups, parties and concerts! A reliable amplifier which will complement your PA boxes with a strong bass sound. The strong robust housing with the option to rack mount to your PA set up.

Optimal use for mobile DJs with excellent sound characteristics. 480 Watts of power, with perfect tuning in each component.

• Inputs: 1 x RCA Stereo, 1 x 6.3mm Stereo jack
• Outputs: 1 x XLR (stereo), 1 x PA-SpeakOn (stereo), 1 x screw terminals
• Distortion factor <0.5%
• Frequency response: 20 Hz to 20 kHz under 0.5%
• Noise> 98 dB
• Channel isolation:> 82 dB
• Input level:> 0 dB
• Input impedance:> 10 kOhm
• 230V power supply, 50 60 Hz

• 485 x 140 x 295 mm (B x H x D)
• Min depth: 330 mm
• Weight: approx. 8 kg

• Suitable for almost all 19" (48cm) devices up to 12U

• Adjustable top section (up to +45˚ or -135˚ tilting) foreasily accessible controls

• Extremely gig-friendly and portable thanks to four wheels

With the 19" (48cm) Auna rack stand, you can keep allyour rack gear stored away and permanently cables so that set-up and takedowntime of PA setups and gig-to-gig transport is drastically reduced. All of our19" PA amplifiers, dual CD players and mixers fit perfectly into the 19"(48cm) format. With a total of 21U, you have plenty of room available.

Its four wheels allow not only for easy transport of heavyDJ PA equipment, the rack stand also features a high-quality steel constructionthat protects against damage. Thanks to the stop brake mechanism on two of thewheels, the rack can also be fixed in place and secured against any inadvertentrolling away.

Comfortable, ergonomic control of your equipment is possiblethanks to the adjustable top section. The top section can be adjusted to a tiltof +45˚ or -135˚ and fixed in place with the locking mechanism. The 19"(48cm) Auna rack stand is a portable studio and stage rack with impressivedurability and user friendliness.

The rack stand comes shipped as an assembly kit. Set up isextremely easy and can be completed within 10 minutes.

• 4 rubber wheels
• 360˚ rotatable wheels
• Adjustable top section with screw mechanism
• Secured via locking pin
• Bottom rack section with 9U for amplifiers, CD players etc
• Top rack section with 12U for CD player controllers, effectsunits, mixers etc
• Max. load capacity: 50kg

• Max. installation width: 19" (48cm)
• Tilting top section installation height: 21" (54cm) or12U with 24 fixing points
• Bottom section installation height: 16" (41cm) or 9Uwith 18 fixing points
• Bottom section installation depth: 20" (51.5cm)
• 55.5 x 105 x 57cm
• Weight: 9.5kg

• 3-way speaker with a 10" (25 cm) subwoofer, midrange horn and piezo tweeter

• 200 W RMS - equivalent to 400 W max.

• Wear resistant with protective corners, felt coat and guard

Feel the beat. With the Malone PW-1022 3-way PA speaker the sound is on your side.

With 200 W RMS output – correspondingly 400 W max – the Malone PW-1022 full range speaker doesn't just give off homely sounds but also heats up events and parties or all types. The ensemble of a 25 cm (10") sub-woofer, mid-range horn and piezo tweeter provide atmospheric and powerful sounds. The durable, reliable components prove themselves in regular use while its its solid construction in a sturdy wooden housing with protective corners, felt and guard mean it is protected against damage from stage use and transport. Recessed grips also make it easy to tranport the speaker and a standard flange makes a standing set-up possible.

Make more out of your sound with the Malone PW-1022 3-way speaker.

• Connections: 1 x PA input, 1 x PA output, 2 x 6.3mm jack input, 1 x gold-plated stereo screw terminal input
• Sensitivity: 95 dB
• Frequency response: 50 Hz to 18 kHz
• Optional subwoofer
• Impedance: 8 ohms

• Measurements: approx. 36 x 4.5 x 31 cm (B x H x T)
• Weight: approx. 10.2 kg

• Highly flexible cable in required length. Fine assembly with 2 wire cable, one wire coloured.
• 1.5mm² core

• Highly flexible cable in required length. Fine assembly with 2 wire cable, one wire coloured.
• 1.5mm² core

• 1.5mm² core

Shipping time: 3 - 5 days