• 60 cm extractor hood

• Maximum air extraction rate up to 620 m³/h

• Adjustable 5 minute timer and LED lights (2 x 1.5 Watt) which can be turned off and on

The Klarstein Zelda extractor hood provides small to medium kitchens a way to remove unwanted vapors and keep the olfactory quality of your kitchen at its highest. There are three different performance settings. The highest setting carries up to 620 m³ of exhaust air per hour, so you can tackle without any nasal stress the preparation of your next eight course meal. Both the loudness and the power consumption during operation stay within limits.

The Zelda is a wall mounted hood that fits elegantly with its ergonomic design in any kitchen space. With a width of 60 cm, it is also suitable for narrow kitchens. Via the touch-sensitive control panel, you can control the ventilation, the lighting, and the 5 minute Timer.

To protect the inside of the extractor hood and the exhaust duct from contamination, Klarstein's Zelda has two replaceable and dishwasher safe, aluminum grease filters. The housing is made of brushed stainless steel and has no hidden or hard to reach corners, which makes it extremely easy to clean.

The extractor hood should be mounted on the wall (not on the ceiling) above the cooking surface. The necessary materials for mounting are included. With its stainless steel visage, the extractor hood integrates beautifully into any modern kitchen design. For dim lighting conditions, there is LED lighting built into the Klarstein extractor hood.

Details / Information 65/2014

Supplier Trademark: Klarstein 
Supplier model number: 10029387
Annual energy consumption: 64.9 kWh/year
Energy efficiency class: B 
Fluid dynamic efficiency: 23
Fluid dynamic efficiency class: C
Lighting efficiency: 19.3 lx/W
Lighting efficiency class: C
Fat separation degree: 69.2 % 
Fat separation degree class: D
Airflow at the minimal and maximum speed during standard operation, excluding usage in an intensive mode or fast mode: 366.2 / 619.2 m³/h 
Airflow during operation in an intensive or fast mode: - m³/h 
A-weighted acoustical noise emissions at the minimum and maximum available speed during standard operation: 72 / 74 dB 
A-weighted acoustical noise emissions during operation in an intensive or fast mode: - dB 
Power consumption in off mode: 0.41 W 
Power consumption in standby mode: - W

Details / Information 66/2014

Model number: 10029387
Annual energy consumption: 64.9 kWh/year 
Time extention factor: 1.2
Fluid dynamic efficiency: 23 
Energy efficiency index: 66.5 
Highest measured air flow volume: 342 m³/h 
Highest measured air pressure: 354.5 Pa 
Maximum air flow: 647.7 m³/h 
Highest measured electrical input power: 146.5 W 
Nominal output of lighting system: 3 W 
Average illuminance of the lighting system onto cooking surface: 58 lux 
Measured power consumption in standby mode: - W 
Measure power consumption in off mode: 0.41 W 
Sound power level: 74 dB

• Energy efficiency class B
• Aluminium grease filter, dishwasher-safe
• Low operating noise - 74 dB at highest power level
• Mounting set with wall brackets, dowels and screws
• Power: 213 W
• Power supply: AC 220-240V, 50/60 Hz

• 60 x 31 x 50 cm (WxHxD not including flue duct)
• Height: approx. 67.5 - 105 cm (including flue duct)
• Diameter of the exhaust hose: 150 mm & 153 mm (Ø)
• Length of power cable: approx. 1.40 m
• Weight: approx. 9.2 kg

Shipping time: 3 - 5 days

• • Delivered in pairs
  • Suitable for item 10029385 (Klarstein Zarah extractor hood)
  • Suitable for item 10029387 (Klarstein Zelda extractor hood)
  • Suitable for item 10029388 (Klarstein Zola extractor hood)

With the active carbon filter 2-piece set, you can upgrade your Zarah, Zola or Zeld extractor hoods in only a few steps to a recirculation mode. This is especially useful if you cannot equip your hood with an exhaust pipe. The active carbon filter quickly and reliably removes annoying kitchen odors from the air that is being passed through, thus ensuring a pleasant atmosphere in the room. In order to perform its work optimally, the filters should be changed regularly.

Shipping time: 3 - 5 days