[Returns: -35%] Gärkeller Pro Fermentation Kettle

Super Gärkessel Ich habe schon ein paar Bier mit diesem Gärkessel gebraut und bin sehr zufrieden damit. Es gibt einen Punkt Abzug da die Beine des Kessels scharfkantig sind und ich mich schon ein paar mal geschnitten habe wenn ich unachtsam war.

Super fermentation kettle I have already brewed a few beers with this fermentation kettle and am very happy with it. It loses one point because the legs of the kettle have sharp edges and I have cut myself a few times when I was careless.

Okay, so I would like firstly to say this fermenter is of exceptional quality, the stainless steel, the general build etc. however, the instructions aren’t great, and their reference to the parts, washer, and assembly thereof is somewhat short of good enough. The one thing I did manage to understand (and I’m glad I did) is that you absolutely must fill the fermenter with water to check for leaks before filling with your wine juice or whatever you’re making. After testing mine, it leaked from the dump valve and also from the thermometer as well as the drain valve. Let me make this clear that the dump valve at the bottom had already been fitted. But you are left to assemble the thermometer and (I think) the drain plug yourself. Upon undoing the dump valve, which was screwed on very tightly, I discovered that they had put a clear, squashy washer between the male and female coupling. Straight away, I realise this didn’t look right as I know a little about plumbing. Luckily, I knew what should be in there (a thin, hard, rigid washer) and luckily I had one of those in my toolbox, which I used as well as some PTFE tape around the thread to ensure a water tight seal. That worked perfectly. I noticed afterwards that in the little bag of washers which they provided, there was indeed a hard washer, which I think should’ve been put in the dump valve from the beginning. Moving onto the drain valve, which leaked…… I did my best to follow the instructions, but wasn’t really convinced from the beginning (due to poor references in the instructions) that the washers I was using were the right ones or right for the fitting I was working on. To stop the drain valve from leaking, I used a much better, thicker, squashier washer for my toolbox, and used it on the inside of the fermenter in conjunction with a smaller supplied washer on the inside and outside. It no longer leaked. Moving onto the thermometer ….. well, I think it’s a bad design all round and my other fermenter (a grainfather) is designed much better and doesn’t even have a hole from which it can leak from. Once again, the washer it comes with appears to be inadequate, so I reached into my toolbox and found a more appropriate washer which was larger and squashier, which I placed on the inside of the fermenter along with two smaller supplied washers as I did before before tightening the nut against it. Again it worked and no longer leaks. don’t know whether you followed all of that and I don’t know whether it’s helpful or whether I was just unlucky but one thing is for sure, the manufacturer/supplier needs to up their game by improving the instructions, especially when it comes to identifying which washer to use where (larger pictures and dimensions would help greatly), probably provide better washers???, and make sure whoever is assembling the dump valve doesn’t insert the wrong washer as I’m convinced mine was assembled incorrectly???. Apart from my initial problems, I still think the fermenter is worth the money I paid, but I’m afraid I’m only going to give it four stars as it is let down by poor instructions and confusing ambiguity associated with the washers, resulting in, a leaky fermenter for me. I’m just so glad I filled it with water first and I suggest you do exactly the same.

Okay, so I would like firstly to say this fermenter is of exceptional quality, the stainless steel, the general build etc. however, the instructions aren’t great, and their reference to the parts, washer, and assembly thereof is somewhat short of good enough. The one thing I did manage to understand (and I’m glad I did) is that you absolutely must fill the fermenter with water to check for leaks before filling with your wine juice or whatever you’re making. After testing mine, it leaked from the dump valve and also from the thermometer as well as the drain valve. Let me make this clear that the dump valve at the bottom had already been fitted. But you are left to assemble the thermometer and (I think) the drain plug yourself. Upon undoing the dump valve, which was screwed on very tightly, I discovered that they had put a clear, squashy washer between the male and female coupling. Straight away, I realise this didn’t look right as I know a little about plumbing. Luckily, I knew what should be in there (a thin, hard, rigid washer) and luckily I had one of those in my toolbox, which I used as well as some PTFE tape around the thread to ensure a water tight seal. That worked perfectly. I noticed afterwards that in the little bag of washers which they provided, there was indeed a hard washer, which I think should’ve been put in the dump valve from the beginning. Moving onto the drain valve, which leaked…… I did my best to follow the instructions, but wasn’t really convinced from the beginning (due to poor references in the instructions) that the washers I was using were the right ones or right for the fitting I was working on. To stop the drain valve from leaking, I used a much better, thicker, squashier washer for my toolbox, and used it on the inside of the fermenter in conjunction with a smaller supplied washer on the inside and outside. It no longer leaked. Moving onto the thermometer ….. well, I think it’s a bad design all round and my other fermenter (a grainfather) is designed much better and doesn’t even have a hole from which it can leak from. Once again, the washer it comes with appears to be inadequate, so I reached into my toolbox and found a more appropriate washer which was larger and squashier, which I placed on the inside of the fermenter along with two smaller supplied washers as I did before before tightening the nut against it. Again it worked and no longer leaks. don’t know whether you followed all of that and I don’t know whether it’s helpful or whether I was just unlucky but one thing is for sure, the manufacturer/supplier needs to up their game by improving the instructions, especially when it comes to identifying which washer to use where (larger pictures and dimensions would help greatly), probably provide better washers???, and make sure whoever is assembling the dump valve doesn’t insert the wrong washer as I’m convinced mine was assembled incorrectly???. Apart from my initial problems, I still think the fermenter is worth the money I paid, but I’m afraid I’m only going to give it four stars as it is let down by poor instructions and confusing ambiguity associated with the washers, resulting in, a leaky fermenter for me. I’m just so glad I filled it with water first and I suggest you do exactly the same.

OGGETTO DI BUONA QUALITA'

GOOD QUALITY ITEM

The stainless steel makes it incredibly easy to sterilise. The temperature gauge makes for better temperature monitoring for trickier brews such as lagers. In addition, the cone means the yeast etc settles at the bottom, so you can just pour it out as pictured at the end. No syphons, reducing chances of bacteria. All really high quality and will last a life time.

The stainless steel makes it incredibly easy to sterilise. The temperature gauge makes for better temperature monitoring for trickier brews such as lagers. In addition, the cone means the yeast etc settles at the bottom, so you can just pour it out as pictured at the end. No syphons, reducing chances of bacteria. All really high quality and will last a life time.

All good! Good and quality item! Fast delivery!

All good! Good and quality item! Fast delivery!

Buena compra calidad-precio. Facilita mucho al cervecero casero. Quizás hay cosas mejorables, pero todo Homebrewer lo costumiza a su gusto. 100% recomendable

Good value for money. It makes it much easier for home brewers. Maybe there are things that could be improved, but every homebrewer customizes it to their liking. 100% recommended.

Zusammengebaut und mal eine Dichtheitsprobe gemacht. Alles Dicht Jetzt kann ich endlich ein Maerzen im Sommer brauen,in Verbindung mit der Kühlspirale

Assembled and did a leak test. Everything tight Now I can finally brew a March in the summer, in connection with the cooling spiral

Dopo averlo acquistato su Amazon mi sono accorto che in Italia sono disponibili altre soluzioni da venditori specializzati, perfettamente equivalenti e più economiche. E' tuttavia ben fatto ed è stato consegnato rapidamente

After purchasing it on Amazon I realized that in Italy there are other solutions available from specialized sellers, perfectly equivalent and cheaper. However, it is well made and was delivered quickly

Ob Hell oder Dunkel, trocken oder lieblich, Wein oder Bier, mit diesem Gärkeller Gärkessel wird aus frischer Vorwürze leckeres Bier und aus Fruchtsaft bester Wein! Bin zufrieden

Whether light or dark, dry or sweet, wine or beer, with this Gärkeller fermentation kettle, delicious beer is made from fresh pre-wort and the best wine from fruit juice! Am satisfied

Beim Auspacken fällt zunächst auf, aus wie wenig Teilen der Gärbehälter besteht. Der Tank ist im Grunde aus einem Stück und hat damit wenige Stellen, an denen sich Dreck festsetzen könnte oder die undicht werden könnten. Positiv fällt außerdem auf, dass alle aufschraubbaren Teile Standardmaße haben, sodass diese auch leicht ersetzt werden können. Der Deckel sitzt fest und alles ist dicht. Alles in allem bin ich positiv überrascht und kann den Gärbehälter nur weiterempfehlen.

When unpacking, the first thing you notice is how few parts the fermentation container consists of. The tank is basically one piece, leaving few places for dirt to get stuck or leaks. Another positive aspect is that all parts that can be screwed on have standard dimensions, so that they can also be easily replaced. The lid is tight and everything is tight. All in all, I am positively surprised and can only recommend the fermentation tank.

so ist das Gerät An sich eher klein, aber es passt wirklich sehr viel hinein. Muss man noch aufbauen, dass ging aber schnell. die Verarbeitung ist gut und hochwertig gemacht. ich denke daher, dass wenn man es gut behandelt auch lange dran seine Freude hat. Die Zutaten muss man noch extra kaufen, aber das ist ja auch klar. so funktioniert es gut und es wird auch gut beschrieben. mich hat es so überzeugt. und auch das Bier ist uns gut gelungen.

The device itself is rather small, but it really fits a lot. You still have to set it up, but that was quick. the workmanship is good and of high quality. I therefore think that if you treat it well, you will enjoy it for a long time. You have to buy the ingredients separately, but that's obvious. this is how it works well and it is also well described. it convinced me so much. and the beer was good too.

The media could not be loaded. It’s now been some months and multiple brews fermented in this. It works a treat every time. It is exceedingly well made Reliable (ie easy to control temperature) and the seals are still doing their job! I wish they would design a sleeve for it for the colder months but that’s not a design flaw it’s something to remember if you brew in winter. It would have gotten a 5 star if the thermometer was threaded properly instead of the way it is designed at the mo.

The media could not be loaded. It’s now been some months and multiple brews fermented in this. It works a treat every time. It is exceedingly well made Reliable (ie easy to control temperature) and the seals are still doing their job! I wish they would design a sleeve for it for the colder months but that’s not a design flaw it’s something to remember if you brew in winter. It would have gotten a 5 star if the thermometer was threaded properly instead of the way it is designed at the mo.

Ich habe jetzt 2 von diesen Geräten.

I now have 2 of these devices.

Der Gärkessel ist sauber verarbeitet und ist schon in Gebrauch. Die Verlängerungsteile der Füße machen einen etwas gagliegen Eindruck und bei 3/4 Belastung wackelt der Kessel schon. Werde wohl das Teil auf eine feste Grundplatte befestigen.

The fermentation kettle is cleanly processed and is already in use. The extension parts of the feet make a somewhat gaglegen impression and the shell already wobbles at 3/4 load. Will probably attach the part to a solid base plate.

Produkt in Ordnung Der Gärkessel ist sauber verarbeitet und ist schon in Gebrauch. Die Verlängerungsteile der Füße machen einen etwas gagliegen Eindruck und bei 3/4 Belastung wackelt der Kessel schon. Werde wohl das Teil auf eine feste Grundplatte befestigen.

Product OK The fermentation kettle is cleanly made and is already in use. The extension parts of the feet look a bit flimsy and the kettle wobbles when it is 3/4 loaded. I will probably attach the part to a solid base plate.

Top Mega gute Qualität

Top Mega good quality

Mega gute Qualität

Super good quality

Sauber verarbeitet, funktional und durchdacht - unsere Erwartungen wurden übertroffen. Wir hatten etwas bedenken hinsichtlich Qualität, da die Klarstein Produkte wohl in Asien produziert werden und einige Qualitätsschwankungen haben sollen. Unser Gärtank war einwandfrei. Tatsächlich waren wir positiv überrascht von der durchdachten Konstruktion, die auf den Fotos teilweise nicht so gut rüberkommt. Es wird für den innenliegenden Ablauf noch ein rechtwinkliger Edelstahl-Aufsteckaufsatz mitgeliefert. Dieser kann z.B. mit einem desinfizierten Esslöffel am Ende beim Abfüllen sukzessive nach unten gedreht werden, sodass das Jungbier bis kurz vor dem Hefe-Sediment abgezogen werden kann (weniger Sediment in den Flaschen und weniger Jungbier-Verlust). Die konische Form am Boden ist natürlich dabei nicht weniger hilfreich. Auch der Gärverschluss hat noch eine zusätzliche, innenliegende Kunststoffkappe, die zwar für Gase durchlässig, aber keine Fliegen, o.ä. ins Jungbier lassen. In Kombination mit dem Deckel des Gärverschluss hat man einen doppelten Schutz. Das Thermometer arbeitet aus unserer Sicht einigermaßen genau. Wir haben bislang mit einer Standard Edelstahl Gärkanne gearbeitet und sind mit dem Upgrade auf den Klarstein Gärtank vollends zufrieden: + Kein Bierheber mehr erforderlich + Weniger Sediment in den Flaschen + Deutlich weniger Verlust (konische Form, besserer Abzug über dem Sediment) + Leichter zu reinigen (Form, größere Öffnung) + Eingebautes Thermometer + Gärverschluss besser geschützt Und nicht zuletzt sieht das Teil einfach noch ein Stücken besser aus. ;-) Kaufempfehlung!

Clean workmanship, functional and well thought out - our expectations were exceeded. We had some concerns about the quality, since the Klarstein products are probably produced in Asia and are said to have some quality fluctuations. Our fermentation tank was flawless. In fact, we were pleasantly surprised by the well thought-out construction, which sometimes doesn't come across so well in the photos. A right-angled stainless steel plug-on attachment is also supplied for the internal drain. This can, for example, be gradually turned downwards with a disinfected tablespoon at the end of the filling process, so that the green beer can be drawn off until just before the yeast sediment (less sediment in the bottles and less green beer loss). The conical shape at the bottom is of course no less helpful. The fermentation lock also has an additional internal plastic cap, which is permeable to gases but does not let flies or the like into the green beer. In combination with the lid of the fermentation lock you have a double protection. From our point of view, the thermometer works fairly accurately. We have been working with a standard stainless steel fermentation can so far and are completely satisfied with the upgrade to the Klarstein fermentation tank: + No longer a beer siphon required + Less sediment in the bottles + Significantly less loss (conical shape, better drainage above the sediment) + Easier to clean (shape, larger opening) + built-in thermometer + fermentation lock better protected And last but not least, the part simply looks a bit better. ;-) Purchase recommendation!

Bien acabado (soldaduras, patas,...). Alguien me contestó que la salida inferior era de 1/2", pero realmente es de 3/4".

Well finished (welds, legs,...). Someone told me that the lower outlet was 1/2", but it is actually 3/4".

It's a great product, seems well made and much more practical than just using a big old bucket. The two drain valves on the pro version are very handy. One gripe is that the thermometer comes with a silicone gasket to seal it, but the diameter of the shaft that fits against the hole in the side of the cylinder isn't really big enough. The end result is that when you tighten the nut, the gasket is easily damaged by the sharp edges of the hole. This seems like a bit of a design flaw - I had to find a replacement gasket for it. A washer might help as well, but as sold, it's prone to dripping where the thermometer goes through the side wall. Two observations: 1. The amount of fluid left in the conical section at the bottom when you drain it using the racking arm is quite a bit, like 1.5 litres or so - certainly more than what you'd leave in a bucket if you were racking carefully. 2. The markings are in litres and US gallons. So 30L is marked as 8 gallons. In imperial (UK) measures 30L would be more like 6.6 gallons.

It's a great product, seems well made and much more practical than just using a big old bucket. The two drain valves on the pro version are very handy. One gripe is that the thermometer comes with a silicone gasket to seal it, but the diameter of the shaft that fits against the hole in the side of the cylinder isn't really big enough. The end result is that when you tighten the nut, the gasket is easily damaged by the sharp edges of the hole. This seems like a bit of a design flaw - I had to find a replacement gasket for it. A washer might help as well, but as sold, it's prone to dripping where the thermometer goes through the side wall. Two observations: 1. The amount of fluid left in the conical section at the bottom when you drain it using the racking arm is quite a bit, like 1.5 litres or so - certainly more than what you'd leave in a bucket if you were racking carefully. 2. The markings are in litres and US gallons. So 30L is marked as 8 gallons. In imperial (UK) measures 30L would be more like 6.6 gallons.

Sehr tolles Produkt bei dem das Preis/Leistungsverhältnis absolut i.O. ist. Das einzigste was ich nachträglich noch bestellte habe ist ein weiteres Termometer, damit der Kessel nicht nur für die Fermentierung sondern auch während eines Brauvorgangs mit heißen Flüssigkeiten verwendet werden kann. - Sonst -> Super Kessel!

Very great product with the price/performance ratio is absolutely OK. The only thing I ordered afterwards is another thermometer, so that the kettle can be used not only for fermentation but also during a brewing process with hot liquids. - Otherwise -> Super boiler!

Super ketel. Mooi afwerking goede rubbers en stevige puntlassen. Het wachten waard.

Super boiler. Nice finish, good rubbers and sturdy spot welds. Worth the wait.

alles super

everything great

Ottimo prodotto per tutti coloro che hanno la passione dell'homebrewing. Indubbiamente un prodotto che facilita e ottimizza il processo di fermentazione e travaso anche grazie ai suoi due rubinetti

Excellent product for all those who have a passion for homebrewing. Undoubtedly a product that facilitates and optimizes the fermentation and decanting process also thanks to its two taps

Ho comprato questo fermentatore come upgrade rispetto ai molto prosaici barilotti di plastica per l’autoproduzione della birra. Questo paiolo è ottimo, di acciaio inox, ha una capienza notevole per la produzione casalinga (30 lt.), ciononostante è di poco ingombro. La forma a cono è perfetta, così aprendo il rubinetto si evita che fuoriesca anche il lievito. Ha tutte le comodità che servono per la fermentazione (rubinetto in fondo, termometro di controllo, tacche di misurazione), alla prova empirica è andato tutto alla grande, siamo felicissimi dell’acquisto!

I bought this fermenter as an upgrade from the very prosaic plastic kegs for home brewing. This cauldron is excellent, made of stainless steel, has a considerable capacity for home brewing (30 liters), and yet takes up little space. The cone shape is perfect, so that when you open the tap, the yeast doesn't come out. It has all the conveniences needed for fermentation (tap at the bottom, control thermometer, measurement marks), in the empirical test everything went great, we are very happy with the purchase!

Il prodotto rispecchia perfettamente la descrizione. Il rubinetto di scarico è funzionale e realizzato con materiali di alta qualità. Il coperchio sigilla bene, buona guarnizione e comodi ganci per la chiusura ermetica. Pratico da lavare e facile da trasportare grazie ai due manici. I piedini antiscivolo lo rendono stabile. Soddisfatta dell'ordine!

The product perfectly matches the description. The drain tap is functional and made of high quality materials. The lid seals well, good gasket and convenient hooks for hermetic closure. Practical to wash and easy to carry thanks to the two handles. The non-slip feet make it stable. Satisfied with the order!

Después de comprar la caldera de maceración necesitaba un depósito para poder tener mi cerveza hecha qué me permitirse acumularlo y pudiese colocarlo con facilidad y con este tanque cumplo todas mis necesidades. Contentísimo

After purchasing the mash tun I needed a tank to store my brewed beer that would allow me to store it and be able to place it easily, and with this tank I meet all my needs. Very happy.

Ya hacía tiempo que me llamaba la atención el tema de fabricar mi propia cerveza artesanal y este tanque es perfecto para iniciarse, es de acero inoxidable por lo cual se limpia fácilmente además al tener grifo es súper higiénico y con 30 litros de capacidad. Tiene todo lo que necesitas en un solo producto, termómetro integrado tapa ermetica y tubo de fermentación. Gran calidad y muy buen precio

I've been interested in making my own craft beer for a while now and this tank is perfect for getting started. It's made of stainless steel so it's easy to clean, and since it has a tap it's super hygienic and has a capacity of 30 liters. It has everything you need in one product, an integrated thermometer, an airtight lid and a fermentation tube. Great quality and a very good price.

Im Grunde handelt es sich hier um einen sehr formschönen Behälter aus hochwertigem Edelstahl mit Thermometer und Ablassventil, der sich luftdicht verschließen lässt. Aber auch nur im Grunde, denn eigentlich ist dieser Maischekessel sehr viel mehr, da er die heimische Küche, Hobbykeller oder Speisekammer in eine Brauerei verwandelt. Ich ziehe diese "analoge" Variante der vollautomatischen Bierbrauanlage vor, da ich so wirklich alle Schritte beeinflussen und überwachen kann. Man muss sich jedoch auch mehr mit der Materie auseinandersetzen, es wird nicht umsonst Brauerei"kunst" genannt. Sehr praktisch ist die konische Form, da sich so unten am Boden die Hefe sammelt. Das Thermometer ist - soweit ich das beurteilen kann - auch präzise und die Möglichkeit den Druck über das Fermentierröhrchen auszugleichen, ohne den Deckel zu öffnen ist auch sehr hilfreich. Alles in allem bin ich zufrieden mit dem Kessel!

Basically, this is a very elegant container made of high-quality stainless steel with a thermometer and drain valve that can be closed airtight. But only basically, because this mash kettle is actually much more, as it transforms the home kitchen, hobby room or pantry into a brewery. I prefer this "analogue" variant of the fully automatic beer brewing system because I can really influence and monitor all steps. However, you have to deal more with the matter, it is not called brewery "art" for nothing. The conical shape is very practical, since the yeast collects at the bottom. The thermometer is also accurate as far as I can tell and being able to equalize the pressure across the fermenting tube without opening the lid is also very helpful. All in all, I'm happy with the kettle!