• Compact substructure subwoofer with bass reflex housing

• 30cm (12") woofer with 2 powerful bass reflex tubes

• 300 W RMS / 600W max. power

Feel the beat! The auna CB300-4BX subwoofer in an extra flat construction with light effect, powerful sound characteristics and practically oriented design makes music sound rich.

In the low-resonance bass reflex case, a 30 cm (12") low-frequency subwoofer tirelessly pushes down to the lowest frequencies. The passive subwoofer delivers 300 W maximum or 600 W RMS power for low-pressure bass at the start and works completely in service with connected amplifiers. Next to its sound properties, the auna CB300-4BX substructure subwoofer scores with extra-flat overall dimensions and rugged housing with a durable felt coating. The small size allows for a flexible positioning under the driver's or the passenger's seat or the boot of the car. The cone made of polypropylene (PP) with rubber bead provides for particularly resonance-free vibration without transmission to the frame. Whether horizontal or vertical, the auna CB300-4BX can be installed quickly, unobtrusively and securely in the vehicle interior. It makes a special impression with its blue LED light effect, which provides the right atmosphere in the interior of the car. A 12V cable set for voltage supply is also included in the scope of delivery.

Bass pressure of the finest quality: with the auna CB300-4BX passive subwoofer.

• Extra-flat, resonance-free housing
• Resistant felt coating
• PP cone with rubber bead
• Sensitivity: 90 dB
• Frequency response: 30 Hz to 1000 Hz

• Dimensions: about 47 x 16 x 58 cm (WxHxD)
• Weight: about 12 kg

• Powerful: 2-channel power amplifier with 2 x 95 watts RMS output power

• Bridgeable: possibility for 2- and 1-channel operation

• Pure bass: switchable bass boost (+6, + 12dB)

Powerful amplifier with a sophisticated design wanted - auna found one.

The auna C500.2 car power amplifier is a 2-channel amplifier with a power of 2x 95 watts RMS. Combined with the sophisticated design in a red metal look, the power amp impresses with a switchable bass boost. Further adjustments to the sound can be made via the adjustable high and low pass filters. Furthermore the power amplifier can be used in different technical setups. The amplifier with its particularly low-resonance body is also bridgeable and can be used as a monobloc. In this way powerful subwoofers can be used for broadcasting.

• Connections: 1 x stereo RCA line input, 2 x stereo speaker output (screw terminals)
• Control range low-pass filter: 50 - 250 Hz
• Control range high-pass filter 50 - 500 Hz
• Input sensitivity: 120 mV - 1.0 V
• Input impedance: 10 kiloohms
• Output impedance: 2 to 8 ohms in stereo mode
• Frequency response: 10 - 30,000 Hz
• Signal-to-noise ratio: 90 dB (without filter)
• 3 filter settings (high pass filter, lowpass filter, full)
• Adjustable gain
• Fuse (1x 15A)
• Power supply: 10.5 - 15 volts

• Dimensions: approx. 25 x 5.2 x 20 cm (WxHxD)
• Weight: approx. 3 kg

All the cables you need to get great sound on the move!

Complete wiring kit for car hifi amps including power and speaker cables with all connectors.

• 6 meters power cable - 8 Gauge, 10mm ²
• 1.2 m ground cable - 8 Gauge, 10mm ²
• 6 meter remote control cable - 18 Gauge, 1mm ²
• 6-meter speaker cables - 12 Gauge, 4mm ² with 90 ° angled RCA plugs (on one end) - gold plated connectors
• 6 meter RCA signal cable
• 1.8 meters Cable Management
• 60 amps AGU fuse – gold plated, waterproof
• Complete with cable ties and safety guides

Shipping time: 3 - 5 days