












[Returns: -10%] Chiller 9 Immersion Cooler
-
56,99 €Original price: 79,99 €
- Low stock - order quickly! In stock and ready for you! Order now and enjoy your purchase without delays. Low stock - order quickly!
- Shipping time: 4 - 6 days Receive it sooner than you think. Don’t miss this opportunity, order now! Receive it sooner than you think. Don’t miss this opportunity, order now!
- Ready to ship in 24 hours
- 14 day cooling off period
Condition - like new, with minor signs of wear
Details: Product may have a cosmetic damage on non-visible sides (back or bottom). The original box may be slightly damaged or repacked. Product comes with a 1-year warranty
Top features
Cold in no time: cooling spiral with 21.5 cm diameter and 18 cooling loops for quick cooling of beer mash
Best beer by fast cooling: 50 litres of mash in 30 minutes from 100 ° C to room temperature (depending on water temperature and flow rate)
Hygienic and flavourful: 100% stainless steel, easy to clean, no rust and no flavour to the mash
Features
- Cooling spiral with 18 loops
- Spiral diameter: 21.5 cm
- Inner tube diameter: 11 mm
- Tube outside diameter: 12 mm
- Material: 304 stainless steel
- Pipe ends shaped into hooks for hanging on the edge of the boiler
Dimensions and Technical Details
- Dimensions: approx. 21.5 x 41 x 31 cm (WxHxD)
- Weight: approx. 1.9 kg
What will be delivered?
- 1 x immersion cooler
Delivery & shipment
Shipping time: 4 - 6 days
Your order will be delivered to the selected address per order. This address does not have to match the billing address. You can send the orders to your family, friends or office if you are not at home during the day.
Safety and Operating Instructions
Product Safety Information
Manufacturer:
Chal-Tec GmbH
Wallstr. 16
10179 Berlin
www.berlin-brands-group.com
Responsible Person:
Chal-Tec GmbH
Wallstr. 16
10179 Berlin
E-mail address:
info@go-bbg.com
No review available for this item.
J’ai entrepris récemment de faire ma propre bière et de brasser. J’avais donc besoin d’un serpentin pour pouvoir refroidir rapidement le moût avant de le mettre à fermenter. Après quelques recherches et différentes stratégies (utiliser du cuivre et faire le serpentin par ex), j’ai finalement opté pour l’achat de ce produit.D’abord, il est en inox et ça reste le meilleur matériau pour le travail alimentaire. Ensuite, il y a 18 "tours de spire", ce qui permet un refroidissement efficace et sur une hauteur conséquente (50 cm). Son diamètre ne dépasse pas celui de mon "chauffe vin" et il passe juste à l’intérieur.Je l’ai couplé à une pompe de bassin aquatique (2500L/min) et 2 tuyaux en PVC pour irrigation (bien prendre du 12/16 mm en diamètre intérieur/extérieur). Franchement, avec ces diamètres, même pas besoin de mettre de collier de serrage, ça passe nickel et ça tient bien. La pompe permet de faire passer de l’eau qu’on refroidit (blocs froids du congel et glaçons) dans le serpentin. Pour un refroidissement optimal, il faut faire entrer l’eau par le haut du serpentin : elle va refroidir le liquide en surface et comme les liquides froids ont tendance à descendre, ça ira plus vite... (ruse de prof de sciences).Je viens de le tester cet après-midi et j’ai pu refroidir de 104/105°C à 20°C en 10 minutes environ. C’est plutôt un très beau score mais il n’y avait que 6/7 L donc avec plus de volume, ce serait probablement plus long. Néanmoins, comme le serpentin ne plongeait pas complètement, ce n’est même pas certain que ce soit plus long.Bref, je vous recommande ce refroidisseur de bonne qualité à un prix convenable.
I recently started making my own beer and brewing. So I needed a coil to be able to quickly cool the wort before putting it to ferment. After some research and different strategies (using copper and making the coil for example), I finally opted to buy this product. First, it is made of stainless steel and it remains the best material for food work. Then, there are 18 "turns of the coil", which allows efficient cooling and over a significant height (50 cm). Its diameter does not exceed that of my "wine heater" and it passes just inside. I coupled it to a water pond pump (2500L / min) and 2 PVC pipes for irrigation (be sure to take 12/16 mm in internal / external diameter). Frankly, with these diameters, you don't even need to put a clamp, it goes through perfectly and holds well. The pump allows water to pass through that is cooled (cold blocks from the freezer and ice cubes) into the coil. For optimal cooling, the water must enter through the top of the coil: it will cool the liquid on the surface and as cold liquids tend to go down, it will go faster... (science teacher's trick). I just tested it this afternoon and I was able to cool from 104/105°C to 20°C in about 10 minutes. It's a pretty good score but there were only 6/7 L so with more volume, it would probably take longer. However, as the coil did not submerge completely, it's not even certain that it will take longer. In short, I recommend this good quality cooler at a reasonable price.
Super Teil,️habe es bestellt ohne zu wissen welche Anschlüsse das teil hat, darum hier die Rezension und der bitte die Anschluss dimensionen in der Produktbeschreibung mit anzugeben.️️Innen durchmesser sind 11mm️Ausendurchmesser sind 12mm oder 12,5mmSchnellere Lieferung als anfangs geplant, einfach TOP, jetzt muss es nur noch lange halten
Great part, I ordered it without knowing which connections the part had, so here is the review and please include the connection dimensions in the product description. Inner diameter is 11mm Outer diameter is 12mm or 12.5mm Faster delivery than initially planned, simply TOP, now it just has to last a long time
Gut verarbeitet, der Durchmesser ist sehr klein, als Poolheizung zu klein
Well made, the diameter is very small, too small for a pool heater
Geht zurück, glaube die Bilder sagen alles. QUALITÄTSKONTROLLE?
Going back, believe the pictures say it all. QUALITY CONTROL?
Hallo Ich habe diese Spirale zur Poolwasser Erhitzung genutzt. Die Spirale ist jetzt auch nach mehreren Heizvorgängen dicht.
Hello I used this spiral to heat the pool water. The spiral is now tight even after several heating processes.
Ich verwende zwei dieser Spindeln in der Feuertonne als Poolheizung. Funktioniert tadellos. Wichtig ist nur, dass man schon beim Anfeuern Wasser durchlaufen lässt und es erst abschaltet, wenn das Feuer wieder aus und die Spindel etwas abgekühlt ist.
I use two of these spindles in the fire barrel for pool heating. Works perfectly. The only important thing is that you let the water run through when you start the fire and only switch it off when the fire has gone out again and the spindle has cooled down a bit.
Leider defekt und wird zurück gesendet
Unfortunately defective and sent back
Kühlt mit meinem kalten Wasser innerhalb von 30min von 90 auf 25 Grad runter. Kann ich jedem Heimbrauer nur empfehlen.
Cools down from 90 to 25 degrees with my cold water within 30 minutes. I would recommend it to any home brewer.
Macht Wasser warm
Makes water warm
Die Spirale kann nicht nur kalt sondern auch schön heiß. Ich benutze sie um meinen Hot tub zu heizen. Wie auf den Bildern zu sehen, wird die Feuerquelle dabei Rotglühend, die Spirale ist unbeeindruckt. Was natürlich auch daran liegt das kaltes Wasser durch fließt (700l/h). Was fehlt: Die Nerd gerechte Angabe des Volumes. Wenn ich Lust habe, rechne ich das Volumen aus (oder messe) und schreibe es hier zu.
The spiral can not only be cold but also nice and hot. I use them to heat my hot tub. As can be seen in the pictures, the fire source becomes red hot, the spiral is unimpressed. Which of course is also due to the cold water flowing through (700l/h). What's missing: The nerd-friendly specification of the volume. If I feel like it, I'll calculate (or measure) the volume and write it down here.
Tut was es soll, leider glatte Anschlüsse, da muss man dann ein wenig basteln, ein 1/2" Gewinde würde Sinn machen, sonst alles Top.
Does what it should, unfortunately smooth connections, you have to tinker a bit, a 1/2" thread would make sense, otherwise everything is great.
best buy
best buy
Produkt wie beschrieben, rasche Lieferung
Product as described, quick delivery
hat alles sehr gut funktioniert, vielen Dank.
everything worked very well, thank you very much.
Alles supi Preis Leistung passt
Everything super price-performance fits
Würzekühler gut verarbeitet. Kühlung funktioniert einwandfrei. Nach mehrmaligem Gebrauch sehr zufrieden
Well made wort cooler. Cooling works perfectly. Very satisfied after several uses
Hallo zusammen Eins vorweg, der Kühler ist super. 30 Liter kochende Würze auf 25 Grad in so ca 20 min. Den einen Stern abzug ist weil die Anschlüsse nach unten gebogen waren. Diese hab ich mit einen Bunsenbrenner erwärmt und fast gerade gebogen. Ansonsten sehr geiles Teil
Hello everyone First of all, the cooler is great. 30 liters of boiling wort at 25 degrees in about 20 minutes. The one star deduction is because the connections were bent downwards. I heated it with a Bunsen burner and bent it almost straight. Otherwise very cool part
Es gibt leider oder zum Glück nicht viel zu sagen. Der Kühler macht einen hochwertigen Eindruck, ist sehr stabil und hat meine Erwartungen erfüllt. Alles bestens :-)
Unfortunately or fortunately there is not much to say. The cooler makes a high-quality impression, is very stable and has met my expectations. All the best :-)
sie ist aus Edelstahl, sie ist dicht. Versand ging schnell und es gab keine Beschädigungen. Alles gut!
it is made of stainless steel, it is tight. Shipping was quick and there was no damage. Everything's ok!
Eine leistungsstarke Kühlspirale. Aber: 1) Muss man hier den Schlauch mit Metallklemmen befestigen, sonst leckt es 2) sind die Rohre zu kurz, um vernünftig im (auf der Abbildung zu sehenden) Maischekessel eingehängt zu werden. Es sei denn, man möchte die oberen zwei, drei Windungen außerhalb der Würze haben. Denn man wird den Kessel NIEMALS bis kurz unter den Rand füllen. Somit: nicht schlecht, aber noch Verbesserungspotential.
A powerful cooling coil. But: 1) you have to fasten the hose with metal clamps here, otherwise it will leak 2) the pipes are too short to be sensibly hung in the mash tun (shown in the picture). Unless you want the top two or three turns outside of the wort. Because you will NEVER fill the kettle to just below the rim. So: not bad, but still room for improvement.
Klare Kaufempfehlung. 25 Liter Würze von 99°C auf 23°C in weniger als 20 Minuten.
Clear purchase recommendation. 25 liters of wort from 99°C to 23°C in less than 20 minutes.
Super Produkt, kühlt 20l Würze mit ca. 10°C kaltem Leitungswasser binnen 5-10 Minuten auf 20°C runter. Einen Stern Abzug da die Anschlußleitungen etwas höher sein könnten und ich bei einer 30l Brauanlage nur 85% der Spirale untergetaucht bekomme. Zudem wäre ein richtiger Schlauchanschluß an den Enden auch von Vorteil da man die Schraubklemmen von dem Gartenschlauch sehr beherzt anziehen muss um das Ganze dicht zu bekommen. Geht aber alles noch und wäre eher "Feintuning". Das Teil funktioniert wirklich prächtig. Der Wasserverbrauch ist eher gering. Es reicht schon wenn man es langsam durchfließen lässt und dann meinen Tipp verwendet: Das Wasser welches am anderen Ende rauskommt ist so dermaßen heiß, dass man es auffangen sollte und später für die Reinigung der Anlage verwenden kann!
Super product, cools 20l of wort with approx. 10°C cold tap water down to 20°C within 5-10 minutes. A star deduction because the connection lines could be a bit higher and I only get 85% of the spiral submerged with a 30l brewing system. In addition, a correct hose connection at the ends would also be an advantage because you have to tighten the screw clamps of the garden hose very courageously to get the whole thing tight. But everything is still possible and would be more like "fine tuning". The part works really well. The water consumption is rather low. It's enough if you let it flow through slowly and then use my tip: The water that comes out at the other end is so hot that you should catch it and use it later to clean the system!